Get notified when this product is back in stock
Physical Specifications
Technical Specifications
Usage & Installation:
Packaging & Dimensions:
|
||||||||||||||||||||||||||||||||||||||||||||||
The primary difference is NEC code compliance for residential structures. Standard quadruplex URD cable does not have a code-recognized insulation type (like RHW-2 or USE-2 printed on the individual wires) and usually features a yellow-striped neutral. MHF cable is specifically Type USE-2/RHH/RHW-2 rated, possesses a fully white neutral and a dedicated green ground conductor, and is legally permitted by the National Electrical Code (NEC Article 550) to enter the interior of a home to hook up to the main breaker panel.
Yes, absolutely. 4/0-4/0-4/0-2/0 Aluminum MHF is a Type USE-2 (Underground Service Entrance) cable engineered with rugged Cross-Linked Polyethylene (XLPE) insulation. It is explicitly rated for direct burial in the earth without the need for conduit for the main trench run.
Pro Tip: While the horizontal run in the trench can be direct-buried, you must protect the cable with a rigid conduit (like Schedule 80 PVC) where it transitions out of the ground up to the meter pedestal and where it enters the home's foundation
According to NEC Table 300.5, the standard burial depth for direct-buried MHF cable (rated up to 600V) is 24 inches deep in normal soil. If you choose to run the entire length of the MHF cable inside a approved PVC conduit system, in many jurisdictions, the minimum burial depth requirement drops to 18 inches.
Note: Always check with your local electrical inspector, as some municipal jurisdictions have stricter trench depth requirements.
Mobile Home Feeder (MHF) cable is a heavy-duty underground service entrance cable specifically designed to supply electrical power from an outdoor service pedestal or meter main to the distribution panelboard inside a mobile home or manufactured home. It features a quadruplex design consisting of two phase conductors (black), a neutral conductor (marked with a yellow identity stripe), and a dedicated grounding wire, making it fully code-compliant for safe, direct-burial power delivery. While engineered for manufactured homes, its cost-effectiveness makes it highly popular for running 200-Amp sub-panels to detached garages, workshops, and barns.
The amp rating for 4/0-4/0-4/0-2/0 Aluminum MHF is 200 Amps (Direct Burial / 90°C Wet or Dry Locations)
The difference lies entirely in the sizing of the neutral and ground wires. A 4/0-4/0-2/0-4 setup uses a reduced 2/0 AWG neutral wire and a #4 AWG ground wire to maximize material cost savings and improve cable flexibility during trench pulls. The 4/0-4/0-4/0-2/0 configuration steps up to a full-sized 4/0 neutral line and a 2/0 ground wire. While both handle a 200-Amp capacity, you should always check with your local utility provider or electrical inspector to confirm if your specific jurisdiction mandates a full-sized neutral line to balance heavy single-phase electrical loads.
Wire America ships all of our Mobile Home Feeder cable directly from our centralized fulfillment centers throughout the United States. We cut to length, process, and ship your order within 1–2 business days—allowing you to buy the exact length you need with zero wasted material. Most standard orders arrive straight to your job site, mobile home park, or residential property within 2 to 4 business days, with expedited shipping options available at checkout.
(833) 268-8644
Get this thing filled up so you can help Wire America!